An electrical fire is different. It often starts inside a wall, an attic, or the panel itself, out of sight until smoke or flame breaks through. By the time you smell hot plastic, the damage is already moving through the framing and down the circuit.
In Atlanta's older housing, the risk is built into the walls. Pre-1940 bungalows still carry knob-and-tube wiring never meant for window units and modern kitchens. Ranches from the 1960s and 70s hide aluminum branch wiring that loosens and overheats at its connections. When either is pushed past its rating, the fire and its corrosive smoke can reach rooms far from where it began.
We restore homes after wiring, outlet, and panel fires, in the right order. We secure the structure, remove the acidic soot before it etches, open the affected cavities, and coordinate a licensed electrician for a code-compliant rebuild. Call (866) 688-0301 and we will give you a real ETA.
Signs of an electrical fire, or wiring that could start one
Some electrical fires are obvious. Others smolder inside a wall and leave only a warning smell. Take any of these seriously, and get the power cut and the structure checked before you go back inside.
- A sharp, fishy, or burning-plastic odor near outlets, switches, or the panel
- Scorch marks, brown discoloration, or melted faceplates around receptacles
- Breakers that trip repeatedly, or a fuse box that runs warm to the touch
- Flickering lights and outlets that buzz, spark, or feel hot
- Charring in the attic near old knob-and-tube runs or open splices
- Soot staining that traces back to wiring hidden inside a wall cavity
What our electrical fire damage repair includes
Our electrical fire scope covers everything from the first safety check to the final coat of paint.
- Emergency board-up and roof tarping if the fire vented through the roof
- Acidic soot removal from walls, ceilings, and fixtures without smearing
- Corrosion treatment for metal, appliances, and salvageable electronics
- Odor removal with thermal fogging, ozone, or hydroxyl treatment
- Coordination with a licensed electrician for code-compliant rewiring and panel replacement
- Permit and inspection scheduling with the City of Atlanta, Fulton, or DeKalb County
- Full reconstruction of finished surfaces to pre-fire condition
Our process
Electrical fire restoration follows a careful sequence, because the hazard is often still live when we arrive.
- 1
Safety and power isolation
We confirm Atlanta Fire Rescue has cleared the scene, verify the power is cut at the meter, and assess the structure before anyone re-enters.
- 2
Damage assessment
We trace the fire to its origin, map how far smoke and soot traveled through walls and HVAC, and flag every compromised circuit.
- 3
Board-up and containment
We secure openings, seal off unaffected rooms, and contain the area so soot stops spreading during the work.
- 4
Soot and corrosion control
We remove acidic soot from surfaces and treat metal and electronics quickly, since smoke from burning wire insulation is chloride-heavy and corrodes contacts within days.
- 5
Selective demolition
We open the affected wall and ceiling cavities, remove charred framing and scorched insulation, and expose the wiring your electrician needs to inspect.
- 6
Electrical coordination
We bring in a licensed electrician to rewire, replace the panel, and bring the system to current Georgia code, then schedule the inspection.
- 7
Reconstruction
We rebuild drywall, trim, and finishes so the repaired areas match the rest of your home.
Need this handled today?
Live answer, real ETA, crews on the way 24/7.
What Older Atlanta Wiring Means for Your Fire Risk
Atlanta's charm lives in its old houses, and so does a lot of its electrical risk. The Craftsman bungalows of Grant Park, West End, and Inman Park often still run knob-and-tube wiring from before 1940. It has no ground, grows brittle with age, and was never built for space heaters and a modern kitchen.
The mid-century ranches across DeKalb and south Fulton bring their own hazard in the aluminum branch wiring of that era, which works loose at outlets and switches until a connection overheats. Add the undersized panels and old fuse boxes common then, and circuits end up carrying far more than they were rated to hold.
When one of these systems fails, the flame is only part of the loss. Burning wire insulation gives off a corrosive smoke that settles on electronics, fixtures, and the panel itself. We restore that damage and coordinate the rewire, so your home leaves our hands safer than the day the fire started.
What affects the cost
No two electrical fires cost the same, so we scope yours in person and put it in writing. Whole-home fire restoration in Atlanta averages around $44,633 and ranges widely with the damage.
Why Atlanta homeowners choose Fire Damage Atlanta for electrical fire damage repair
After a fire you shouldn't have to become an expert overnight. Here's what you get the moment you call (866) 688-0301.
- Live answer, 24/7When you call, we give you a real ETA — not a vague "soon" — and dispatch a crew right away, 24/7.
- 4.9/5 from 127+ reviewsAtlanta homeowners and property managers rate our crews for fast, honest, thorough work.
- IICRC-certified, licensed & insuredTrained fire and smoke restoration technicians, fully credentialed in the State of Georgia.
- We handle your insurance claimWe document the loss, build an itemized scope, talk to your adjuster, and bill your carrier directly.
- One team, board-up to rebuildFrom the first emergency step to the last coat of paint, one crew owns the whole job — no handoffs.
Electrical Fire Damage Repair across metro Atlanta
We provide electrical fire damage repair throughout the City of Atlanta and the surrounding Fulton, DeKalb, Cobb, Clayton, and Gwinnett metro — dispatched 24/7 from our Downtown base at 191 Peachtree St NE. A few of the areas we cover:
- Downtown Atlanta
- Midtown Atlanta
- Buckhead, Atlanta
- Old Fourth Ward, Atlanta
- Virginia-Highland, Atlanta
- Inman Park, Atlanta
- Sandy Springs, GA
- Brookhaven, GA
- Decatur, GA
- Druid Hills, GA
- East Point, GA
- College Park, GA
Don't see your neighborhood? See all 67 areas we serve.
